|
|
|
|
|
|
|
|
| New generation of 4-posters. A versatile lifter, from family car to light truck. |
 |
|
|
| This new generation of four posters with capacities from 3,200 kg, 4,000 kg, 5,500 kg, and 7,000 kg have the following unique features:
Unique low drive-on height
Through the extremely low drive-on height of just 13 cm for the ST 4032, ST 4040 types and 16 cm for the ST 4055, ST 4070 types, driving-on with low vehicles is possible without any problems. Thanks to this low drive-on height it is possible to make use of "short" drive-on ramps, so that you gain considerably more positioning space in your workshop.
Totally flat tracks
The lift is perfectly horizontal in every locked position, making it the ideal vehicle lift for wheel alignment. In the lowest position too, the vehicle lift is perfectly level, so that you can use the lift to adjust headlights. The absence of protruding edges on the tracks makes your work much easier.
Custom solution
Because of the wide variety of available models of these 4-post vehicle lifts, Stertil-Koni always has a platform available for your workshop or vehicle programme.
Jump to a product:
|
|
| ST 4032: 4-post hydraulic vehicle lift; 3,200 kg |
|
|
|
 |
|
This vehicle lift totally fulfils all the demands placed on a vehicle lift today. Thanks to the following interesting features, Stertil-Koni is able to offer you a vehicle lift for the future.
1. Low drive-on height of 130 mm so that even low vehicles can easily drive on. 2. With a lifting height of 2000 mm, this four-post vehicle lift is also comfortable to work under. 3. The tracks, with their 520 mm width, no longer have a raised edge. This makes it possible to achieve optimum accessibility to the vehicle to be serviced. This vehicle lift is standard equipped with an adjustable descent speed. This makes the removal of an engine or gearbox a lot simpler.
Naturally, when designing the tracks, account was taken of the possibility to use a jacking beam. This vehicle lift is available with an integrated wheel-free system.(ST 4032F)
Document Download:
|
|
| ST 4040: 4-post hydraulic vehicle lift 4,000 kg. |
|
|
|
This vehicle lift has become the new standard. The vehicle lift can be obtained in a wide range of variants. Thanks to the following interesting features, Stertil-Koni is able to offer you a vehicle lift for the future. 1. Low drive-on height of 130 mm so that even low vehicles can easily drive on. 2. With a lifting height of 2000 mm, this four-post vehicle lift is also comfortable to work under. 3. The tracks, with their 520 mm width, no longer have a raised edge. This makes it possible to achieve optimum accessibility to the vehicle to be serviced.
This vehicle lift is standard equipped with an adjustable descent speed. This makes the removal of an engine or gearbox a lot simpler. Naturally, when designing the tracks, account was taken of the possibility of wheel alignment and the use of jacking beams. The vehicle lift can be optionally supplied with 630 mm tracks so that small buses that may have DRW axles can be hoisted. This vehicle lift can be ordered with an integrated wheel-free system.(ST 4040F)
Document Download:
|
|
 |
|
| ST 4055: 4-post hydraulic vehicle lift 5,500 kg |
|
|
|
 |
|
Stertil-Koni has developed this vehicle lift especially for the new generation of long & heavy delivery vans and light trucks. With a low drive-on height of just 160 mm, the ST 4055 enables vehicle servicing from cars through to light trucks. Because of the lifting height of 2030 mm, this four-post vehicle lift also is comfortable to work under. The tracks, with their 630 mm width, no longer have a raised edge. This makes it possible to achieve optimum accessibility to the vehicle.
The vehicle lift is standard equipped with an adjustable descent speed so that the removal of an engine or gearbox is a lot safer and easier. The vehicle lift can also be used in combination with a jacking beam.
Document Download:
|
|
| ST 4070: 4-post hydraulic vehicle lift 7,000 kg. |
|
|
|
| This compact vehicle lift has the following features. With a low drive-on height of 160 mm, this vehicle lift is also capable of hoisting family cars. Because of the lifting height of 2030 mm, this four-post vehicle lift also is comfortable to work under. The tracks, with their 630 mm width, no longer have a raised edge. This makes it possible to achieve optimum accessibility to the vehicle.
The vehicle lift is standard equipped with an adjustable descent speed so that the removal of an engine or gearbox is a lot safer and easier. The vehicle lift can also be used in combination with a jacking beam.
Document Download:
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
