|
|
|
|
|
|
|
|
| Stertil-Koni 2-Post Vehicle Lifts |
 |
|
|
All 2-post vehicle lifts from Stertil-Koni are equipped with a hydraulic lifting system.
Parts susceptible to wear such as spindles, nuts and cables are not used. This approach yields an unusually long service life. Thanks to the absence of any threshold, you have free access beneath the vehicle for e.g. a gearbox jack or a tool wagon. Our vehicle lifts are protected against overloading by a hydraulic pressure relief valve. The automatic drop-safeguard works independently from the lifting system, and is always active. The patented synthetic runner wheels are self-lubricating, making them maintenance-free.
Stertil gives a lifelong guarantee on the runner wheel system. In short: when you invest in a 2-post vehicle lift from Stertil-Koni, you invest in a long and trouble-free future.
Jump to a product:
|
|
 |
|
| SK 2030: hydraulic 2-post vehicle lift with a lifting capacity of 3,000 kg. |
|
|
|
 |
|
Through its construction totally without threshold in combination with the asymmetric positioning of the telescopic lifting arms, your access to the vehicle is completely unrestricted. The doors can be opened without any problem. The SK2030 has double telescopic lifting arms. Combined with a pick-up height of just 90 mm, makes the SK 2030 applicable from sports car to light commercial van. With a maximum lifting height of 2.02 metres, even the tallest mechanic can work comfortably. Thanks to the specially designed footplates, the SK 2030 has a high degree of stability, so that you can place this vehicle lift on a concrete floor of just 13 cm thick. The SK 2030 is available in several variants.
Document Download:
|
|
| SK 2030F: 2-post lift, equipped with a chassis pick-up system |
|
|
|
| Basically this new SK 2030F is the successor of the well known KS 2028F. On the SK 2030F we are using a chassis pick-up system comparable with the ST 0035F system. Meaning that the vulcanised pick-up pads are adjustable in width and length direction.
The new pick-up system allows the customer, compared to the swing arms, very fast and easy operation. Therefore the chassis pick-up system is the right application for inspection bays, tire and brake shops and even in maintenance shops it is a very interesting option.
Document Download:
|
|
 |
|
| KS 2038: hydraulic 2-post vehicle lift with a lifting capacity of 3,800 kg. |
|
|
|
 |
|
The KS 2038 is specially designed to lift vehicles in the middle segment, from cars through MPVs, SUVs and off-roaders up to and including light commercial vehicles. The KS 2038 with a lifting capacity of 3.8 tonnes is equipped with two hydraulic cylinders and an electronic synchronisation system. The vehicle lift can be supplied in four different heights, so you can adapt the lift to suit your workshop and vehicle programme. Through its construction without threshold in combination with the asymmetric positioning of the lifting arms, your access to the vehicle is completely unrestricted. Doors can be opened without any problem, simplifying entry, exit and working inside the vehicle. Thanks to the absence of any threshold, you have free access beneath the vehicle for e.g. a gearbox jack or a tool wagon.
Document Download:
|
|
| KS 2050: hydraulic 2-post vehicle lift, with a lifting capacity of 5,000 kg. |
|
|
|
| Stertil is a specialist in the design of fast, easily operated and economical vehicle lifts. With a lifting capacity of 5.0 tonnes, the KS 2050 is equipped with two hydraulic cylinders and an electronically controlled synchronisation system. The height of this vehicle lift is adjustable, so you can adapt its height to suit your workshop or vehicle programme. Because of the symmetric construction of the vehicle lift and the double telescopic lifitng arms, it is capable of hoisting small to very long vehicles, such as: MB - Sprinter and VW - LT at the prescribed pick-up points. The KS 2050 lifts vehicles that other 5 tonne vehicle lifts refuse to budge. Superior stability through the specially designed footplates. The specially formed posts ensure even greater strength and stability. These enable the KS 2050, as opposed to other vehicle lifts, to be placed on every normal workshop floor, without special modifications.
Document Download:
|
|
 |
|
| SK 2070: hydraulic 2-post vehicle lift with a lifting capacity of 7,000 kg. |
|
|
|
 |
|
The SK 2070 is equipped with two hydraulic cylinders and an electronically controlled synchronisation system. The SK 2070 is available with single telescopic lifting arms (SK 2070AB) or double telescopic lifting arms (SK 2070A). There is no fixed upper crossbar, so that a variable set-up width is possible from minimum 2800 mm to maximum 3200 mm between the posts. The SK 2070 can thus be modified to fit the available space in the workshop and/or the vehicle programme. Through its construction totally without threshold combined with the maximum lifting height of 2.0 metres, every mechanic can work in maximum comfort. The fully symmetric vehicle lift comes standard with two stackable pick-up extensions.
Document Download:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
