|
|
|
|
|
|
|
|
Jacking Beams, Axle Stands, Garage Lifting Equipment and Electro-hydraulic Lifts
|
|
 |
|
Sliding frame design allowing the jacking beams width to be safely adjusted.
Traversing twin ram operation - The rams can be used in tandem or independently (max. 10 t per ram).
The rams slide transversely, making precise positioning under the vehicle possible even with axle stands.
Precise lowering for optimum working conditions and safety.
Robust air-operated pump.
Tidy storage of saddles and extensions.
Rack on both sides for storage of tools, bolts and screws etc.
Safety valve ensures against overloading.
Hose burst valves in cylinders protect the load from coming down in case of bursting hoses or lost pressure.
Type: JB20LD/JB26LD
Capacity: 2.000kg/2.600 kg
Lifting system: Double hand hydraulic
Min. height: 180 mm
Max. height: 430 mm
Lifting height: 250 mm
Type: JB20PHLD/JB26PHLD
Capacity: 2.000kg/2.600 kg
Lifting system: Air-hydraulic
Min. height: 180 mm
Max. height: 430 mm
Lifting height: 250 mm |
|
Type: JB40PHL
Capacity: 4.000 kg
Lifting system: Air-Hydraulic
Min. height: 230 mm
Max. height: 480 mm
Lifting height: 250 mm
Type: JB 70, JB 120, JB 160, JB 200
Capacities: 7,000 kg; 12,000 kg; 16,000 kg; 20,000 kg
Lifting system: Air-Hydraulic
Min. height: 347 mm
Max. height: 569 mm
Lifting height: 222 mm |
|
|
Brochure - Jacking Beam PDF 1
Brochure - Jacking Beam PDF 2
Brochure - Jacking Beam PDF 3
|
|
|
|
|
|
|
|
|
|
|
| Garage Lifting Equipment |
|
|
|
| Our Garage Lifting Equipment range includes piston compressors from 8 to 350 bar for the compression of air and other gases, screw compressors, breathing air compressors as well as the whole range of compressed air treatment.
Main emphasis in the production of lifting units is put on hydraulic lifts for repair and service works on passenger and utility cars and rail-driven vehicles. Furthermore we offer individual solutions for specific problems.
The flexibility of a medium sized company in combination with high quality requirements, customer orientated planning, development and production and a complete range of garage lifting equipment services makes J.A. Becker & Sons a qualified partner for a wide range of customers worldwide.
|
|
Brochure - Garage Lifting Equipment PDF
|
|
| Electro-hydraulic Lifts |
|
|
|
| All electro-hydraulic lifts from Stertil-Koni are equipped with a hydraulic lifting system.
Parts susceptible to wear such as spindles, nuts and cables are not used. This approach yields an unusually long service life for our electro-hydraulic lifts. Thanks to the absence of any threshold, you have free access beneath the vehicle for e.g. a gearbox jack or a tool wagon. Our electro-hydraulic lifts are protected against overloading by a hydraulic pressure relief valve. The automatic drop-safeguard works independently from the lifting system, and is always active. The patented synthetic runner wheels are self-lubricating, making them maintenance-free.
Stertil gives a lifelong guarantee on the runner wheel system. In short: when you invest in a electro-hydraulic lift from Stertil-Koni, you invest in a long and trouble-free future.
|
|
Brochure - Electro-hydraulic Lifts PDF
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
